Leica BIOSYSTEMS SM2000R Instructions For Use Manual Download Page 3

Page: 3 / 46

Leica SM2010 R

Leica Biosystems Nussloch GmbH

Heidelberger Str. 17 - 19

D –69226 Nussloch
Germany
Phone: +49 6224 143–0

Fax: +49 6224 143–268

Internet: http://www.LeicaBiosystems.com

Assembly contracted to Leica Microsystems Ltd. Shanghai

The information, numerical data, notes and value

judgments contained in this manual represent the

current state of scientific knowledge and state-of-

the-art technology as we understand it following

thorough investigation in this field.

We are under no obligation to update the present

manual periodically and on an ongoing basis ac-

cording to the latest technical developments, nor

to provide our customers with additional copies,

updates etc. of this manual.

To the extent permitted in accordance with the

national legal system as applicable in each indi-

vidual case, we shall not be held liable for errone-

ous statements, drawings, technical illustrations

etc. contained in this manual. In particular, no

liability whatsoever is accepted for any financial

loss or consequential damage caused by or

related to compliance with statements or other

information in this manual.

Statements, drawings, illustrations and other

information as regards contents or technical

details of the present Instructions for Use are not

to be considered as warranted characteristics of

our products.

These are determined only by the contract

provisions agreed between ourselves and our

customers.

Leica reserves the right to change technical spec-

ifications as well as manufacturing processes

without prior notice. Only in this way is it pos-

sible to continuously improve the technology and

manufacturing techniques used in our products.

This document is protected under copyright laws.

All copyrights to this documentation are held by

Leica Biosystems Nussloch GmbH.

Any reproduction of text and illustrations (or of

any parts thereof) by means of print, photocopy,

microfiche, web cam or other methods – includ-

ing any electronic systems and media – requires

express prior permission in writing by Leica Bio-

systems Nussloch GmbH.

For the instrument serial number and year of

manufacture, please refer to the name plate at

the rear of the instrument.

NOTE

Summary of Contents for SM2000R















































Search results

Summary of Contents for SM2000R

Reviews:

Leica BIOSYSTEMS SM2000R, Instructions For Use Manual, Page: 3 / 46

Search results

Summary of Contents for SM2000R

Reviews: