Settings
4 Settings
4.1 Turning down
1. Put the spreader in the carton or put the carton over the spreader to catch the spreading material.
2. Due to the suction effect, the speed of the spreading disc used in practice must be set.
3. Weigh out the ejected spreading material at various slide positions until the suitable slide position is determined.
4.2 Determining the spreading width
Obtain the reference value for the spreading width from the information supplied by the relevant spreading material
supplier.
1. Spread on a firm surface.
2. Weigh spreading material or sweep up a swath lateral to the direction of travel and assess the lateral
distribution.
Formulas
With setting 0 the slider is almost closed and on 20 it is fully open. Now by turning down again with a modified scale
setting, the correct value can be found. When starting spreading, however, the ejected quantity and the lateral distribution
must be checked.
14 / 34
1.1
POLARO
®
Summary of Contents for POLARO
