Poollift Delphin page 4
3. Installation Instructions
Fastening possibilities
Recessed panel
A drill-hole with a diameter of at least 120 mm and a depth of 160 mm has to be executed. Concrete
or a appropriate glue ought to be used for the fastening. Ensure that the panel is fixed vertically and
that the upper edge is on one level with the floor before gluing.
If the Poollift has to be dismantled before winter (e.g. outdoor installation), it is possible to blind the
hole in the floor with a screw cap.
Screwed panel
Six small drill-holes have to be executed for that kind of panel. Heavy duty anchors or dowels should
be used for the fastening.
If the Poollift has to be dismanteld, it is possible to simply unscrew the panel.
Setting up
A minimum water depth of 1050 mm is necessary. Furthermore it is important to ensure, that the
entry point is easily accessible for users and that also a water supply has to be possible.
When using a standard C-tube, the center of the panel should be at least 130 mm to max. 350 mm
away from the edge of the pool. If the distance of 350 mm is exceeded it is possible to use an
extended C-tube (special order).
Installation
Recessed panel:
Execution of a core hole (diameter at least 120 mm) and
then gluing the sleeve (see picture)
Screwed Konsole:
Screwing the panel with 6 screws on the floor
safety ring
Measuring out the place where the panel will be
