LIST OF COMPONENTS AND CONSTRUCTION
1. Massaging tip
2. Massage head connector
3. LCD display
4. Battery Box
5. Handle
BEFORE FIRST USE
1. Remove all packaging material.
2. Remove all remnants of packaging and shipping protection.
3. Make sure the package contents are complete.
4. Check the unit, the power cord, the power plug, and all additional parts for possible
damage during shipping.
5. If possible, store the packaging components.
6. Dispose of in accordance with an accepted waste disposal system.
DEVICE OPERATION
1. Fully charge the battery up to six hours before first use.
2. To charge the battery, plug the DC end of the supplied 24V adapter into the battery
charging port and plug the AC side cord into a wall outlet.
3. The LED bar on the battery flashes to show the battery charge level and to indicate
active charging.
4. With the battery connected, the LEDs on the unit flash to show the battery charge
level and indicate active charging.
5. A full charge is indicated when all LEDs stop flashing and remain fully illuminated.
6. The battery can be charged at any time and at any charge level.
7. It is not recommended to completely exhaust the battery to the level of the red LED.
