INSTRUCTION MANUAL
AAL Profiline alarm receiver
HC-501-BA V1.05 Alarm receiver Page 3 of 4
AAL
Homecare
Fon +49 2208 9339170 Fax +49 2208 9339063 www.aal-homecare.com
Fig. 5: Switching off a call
Switching Off the Operating Indicator
If the illuminated LED is regarded as disturbing (at night, for example), the green operating indicator LED can be switched OFF by
pressing both buttons for approx. 5 seconds. It can be switched ON again by pressing both buttons for approx. 5 seconds.
Error Indication
A system fault is indicated by the operating indicator LED flashing in a
red
and
green
sequence.
If the system fault is caused by another radio signal occupying the frequency band, the operating indicator LED flashes
red
.
A “battery low” message of a programmed transmitter is indicated by the LED flashing
orange
and
red
.
These messages can be switched off by pressing any button.
Briefly operate the
programmed shut-down
transmitter
Fig. 6: Deleting all programmed transmitters and resetting all settings to factory settings
All settings are reset to the delivery status and all
already programmed transmitters are deleted.
Or, if required,
alternatively
Briefly press the left- or
right-hand button
Press and hold
the buttons, connect the
device to a power outlet and
continue to
hold
the buttons until a beep is heard.
