16
LEHLE GmbH · Germany · www.lehle.com · [email protected]
In S mode and with a gain setting of be-
tween 11 and 12 o’clock or more, instru-
ments with piezo pickups, which can oth-
erwise often sound very harsh and shrill,
take on a pleasantly warm and silky tone.
4. According to the sensitivity of the con-
nected instrument, switch the S/D selec-
tor (2) to position D or S.
5. Adjust the Gain controller (6) so that
the signal is optimal for your mixer.
6. Done!
Balanced signal lines are fitted with XLR
connectors or TRS (Tip Ring Sleeve) jack
plugs. In a balanced signal line, the sig-
nal is present in phase at the tip, as in the
case of an unbalanced signal line (XLR
Pin 2).
The second signal conductor carries the
same signal, but with the opposite polar-
ity or mirror-image phase (Ring, XLR Pin
3).
The third conductor is the screening,
and again constitutes the signal ground
(Sleeve, XLR Pin 1).
JACK
XLR
CABLE
Sleeve
Pin 1
Ground
Ring
Pin 3
Signal in mirrored phase
Tip
Pin 2
Signal in phase
