LEGRAND Wattstopper Series Manual Download Page 6

800.879.8585

www.legrand.us/wattstopper

No. 27366 – 5/19  rev. 3a

© Copyright 2019 Legrand All Rights Reserved.

© Copyright 2019 Tous droits réservés Legrand.

© Copyright 2019 Legrand Todos los derechos reservados.

Wattstopper warranties its products to be free 

of defects in materials and workmanship for a 

period of five (5) years. There are no obligations 

or liabilities on the part of Wattstopper for 

consequential damages arising out of, or in 

connection with, the use or performance of this 

product or other indirect damages with respect 

to loss of property, revenue or profit, or cost of 

removal, installation or reinstallation.

Wattstopper garantit que ses produits sont 

exempts de défauts de matériaux et de fabrication 

pour une période de cinq (5) ans. Wattstopper 

ne peut être tenu responsable de tout dommage 

consécutif causé par ou lié à l’utilisation ou 

à la performance de ce produit ou tout autre 

dommage indirect lié à la perte de propriété, de 

revenus, ou de profits, ou aux coûts d’enlèvement, 

d’installation ou de réinstallation.

Wattstopper garantiza que sus productos 

están libres de defectos en materiales y mano 

de obra por un período de cinco (5) años. No 

existen obligaciones ni responsabilidades por 

parte de Wattstopper por daños consecuentes 

que se deriven o estén relacionados con el 

uso o el rendimiento de este producto u otros 

daños indirectos con respecto a la pérdida 

de propiedad, renta o ganancias, o al costo 

de extracción, instalación o reinstalación.

WARRANTY INFORMATION

INFORMATIONS RELATIVES À LA GARANTIE

INFORMACIÓN DE LA GARANTÍA

FCC REGULATORY STATEMENTS

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause 

undesired operation.

NOTE: 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. 

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction 

manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful 

interference in which case the user will be required to correct the interference at his own expense.

This device complies with FCC and IC safety levels of radio frequency (RF) exposure for Mobile devices.
This device is only authorized for use in a mobile application. At least 20 cm of separation distance between this device and the user’s body must be 

maintained at all times.
Any changes or modifications not expressly approved by The Watt Stopper Inc. could void the user’s authority to operate the equipment.

The Bluetooth® word mark and logos are registered trademarks owned by the 

Bluetooth SIG, Inc. and any use of such marks by [licensee name] is under license.

Google Play and the Google Play 

logo are trademarks of Google Inc.

The Apple logo, iPhone, iPod touch, and iTunes are trademarks 

of Apple Inc., registered in the U.S. and other countries.

Summary of Contents for Wattstopper Series







Reviews: