LEGRAND Wattstopper Series Manual Download Page 1

Wattstopper

 

®

DLM Wireless PIR Corner Mount Occupancy Sensor with IPv6/

Bluetooth

®

 Low Energy Technology

Quick Start Guide • Guide de démarrage rapide • Guía de inicio rápido

No: 27366 – 5/19  rev. 3a

Catalog Numbers • Numéros de Catalogue • Números de Catálogo: LMPX-600, LMPX-600-1, LMPX-600-4

Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China

SPECIFICATIONS

Power Supply .......................... Battery powered, CR123A Lithium Ion, 3 VDC
Connection to DLM Network ... Wireless via LMRC-611MCC room controllers 
Lens Types
 LMPX-600 .........................................................................Wide Angle 

 LMPX-600-1 .................................................................... Long Range
 LMPX-600-4 ............................................................ Extra Wide Angle
Wireless Hardware
 Radios: 

 ................................................................ Two IEEE 802.15.4

 Frequency: 

 ............................................................................. 2.4Ghz

 Antennas: 

 ................................ IPv6 Mesh and Bluetooth low energy

Wireless Standards
 

Radio 1:  .........................................................IPv6 Mesh (6LoWPAN)

   Range: 

 .......................................................................up to 60 ft.

 

Radio 2:  ............................................................ Bluetooth low energy

   Range: 

 .......................................................................up to 30 ft.

Wireless Encryption
 

AES-128 bit symmetric key, randomly generated per PAN

 

Shared via secured DTLS only

Environment ............................................................... For Indoor Use Only
 

Operating Temperature ...............................32° to 104°F (0° to 40°C)

 

Storage Temperature .................................23° to 140°F (-5° to 60°C)

 

Relative Humidity .....................................5 to 95% (non condensing)

Compliance/Regulatory
 

FCC, RoHS, 

 

Bluetooth certified

 

UL and cUL listed (E101196)

Patent Pending

Once paired to an LMRC-611 wireless room 

controller or LMBC-650 wireless bridge, 

this unit is set for Plug n’ Go operation, 

adjustment via the DLM Configuration App 

is recommended to meet the local energy 

code where installed.

The DLM Wireless corner mount sensor is a wireless 

battery powered PIR occupancy sensor intended for 

operation with wireless room controllers or bridges. 

Once paired to a wireless room controller or bridge, 

it detects and monitors the presence of motion to 

determine if lights should be on or off.

COVERAGE PATTERNS

Coverages shown are maximum and represent half-step walking 

motion.

Side view

8’

Top view

60

0 7’ 12’ 25’

60’

100°

LMPX-600, wide angle lens

8ft

0

8ft

8ft

16ft

16ft

0

6’ 10ft

27ft

60ft

Top View

Side View

16ft

LMPX-600-1, long range lens

8ft

0

8ft

8ft

16ft

16ft

0

6’ 10ft

27ft

60ft

Top View

Side View

16ft

0

10ft

20ft

30ft

40ft 45ft

8ft

Side View

0

10ft

10ft

20ft

20ft

Top View:

LMPX-600-4, extra wide angle lens

Summary of Contents for Wattstopper Series







Reviews: