LEGRAND Wattstopper LP24, User Manual

Page: 34 / 40

34
SPANNING MIDNIGHT WITH A SCHEDULE
Midnight Scheduling Example – Day Spanning
In some cases, a building’s occupied hours may need to span from one day into the next.
For example, a restaurant may open for dinner at 5 p.m. and stay open until 2 a.m. Use Day
Spanning schedules to accomodate this need.
With a standard schedule, the channel turns on the specified relays at the beginning of the “ON”
minute and turns them off at the end of the scheduled “thru” minute.
With Day Spanning schedules, the channel will not turn off the relay if it is scheduled “thru” 23:59
on one day, and the “ON” schedule for the very next day is set for 00:00 (midnight).
For business hours of 5 p.m. to 2 a.m., Tuesday through Saturday, enter these 6 schedules:
Display
Press Description
After setting
Channel,
Day and
SCHEDULED
ON/OFF, set
the ON time
SELECT
RAISE
LOWER
SELECT
RAISE
LOWER
SELECT
RAISE
LOWER
SELECT
RAISE
LOWER
HOURS
Set THRU:
to 23:59
SELECT
RAISE
LOWER
SELECT
RAISE
LOWER
SELECT
RAISE
LOWER
SELECT
RAISE
LOWER
HOURS
SELECT
RAISE
LOWER
then
SELECT
RAISE
LOWER
then
then
Leave the second
ON: and THRU: times
at 00:00.
Set “Time Delay” and
“Blink before off?”
With COPY flashing
SELECT
RAISE
LOWER
then
HELP
Mark WED
HELP
HELP
SELECT
RAISE
LOWER
then
SELECT
RAISE
LOWER
then
SUN
00:00
SAT
00:00
FRI
00:00
THU
00:00
WED
00:00
TUE
00:00
MON
00:00
SUN
23:59
FRI
23:59
THU
23:59
WED
23:59
TUE
23:59
MON
23:59
SAT
23:59
ON: 00:00 thru: 02:00
ON: 00:00 thru: 00:00
ON: 17:00 thru: 23:59
ON: 00:00 thru: 00:00
ON: 00:00 thru: 02:00
ON: 17:00 thru: 23:59
MINUTES
MINUTES