Wattstopper
®
Line Voltage 0-10V PIR Fixture Integrated Outdoor Sensor
Détecteur de mouvement IRP intégré pour luminaire extérieur
Tension de ligne 0-10V
Sensor PIR de voltaje de línea 0-10V para fixtruas y uso exterior
Installation Instructions • Instructions d’Installation • Instrucciones de Instalación
No: 23270 – 05/17 rev. 2
Catalog Number • Numéro de Catalogue • Número de Catálogo: FSP-212
Country of Origin: Made in China • Pays d’origine: Fabriqué en Chine • País de origen: Hecho en China
DESCRIPTION AND OPERATION
The FSP-212 is a motion sensor that dims lighting from high to low based
on movement. This slim, low-profile sensor is designed for installation
inside the bottom of a light fixture with a 0-10V output dimmable ballast or
LED driver control.
The sensors use passive infrared (PIR) sensing technology that reacts to
changes in infrared energy (moving body heat) within the coverage area.
Once the sensor stops detecting movement and the time delay elapses
lights will go from high to low mode and eventually to an OFF position if
it is desired. Sensors must directly “see” motion of a person or moving
object to detect them, so careful consideration must be given to sensor
luminaire placement and lens selection. Avoid placing the sensor where
obstructions may block the sensor’s line of sight.
The FSP-212 operates at 120V/230V-240V Single Phase/277V. It is
designed to be installed in indoor and outdoor environments, and provides
easy to use selectable modes with several adjustable parameters.
The FSP-212 offers four different control modes of operation, (plus service
and test modes) that can be selected using a rotary pot. Once powered
up, each mode has a factory default set of parameters. Additionally, sensor
adjustment is available for time delay and high/low dim levels via rotary pots.
LENS OPTIONS
Several lenses are available for use with the FSP-212. Lenses give coverage at mounting heights between 8’ - 40’ for applications such
as, offices, warehouses and outdoor use. Density and range of the coverage is determined by the type of lens and mounting height.
Lens modules are IP66 rated when combined with an FSP-212 sensor mounted to an outdoor rated fixture. See the FSP-Lx Coverage
Guide for more information.
SPECIFICATIONS
Voltage ..................................................120V/277V, 50/60Hz
..................................230-240V, 50/60Hz, Single Phase
Load Ratings
@230-240V ...................0 – 300W Ballast or LED Driver
@ 120V ......... 0-800W Tungsten, Ballasts or LED Driver
@ 277V .......................0 – 1200W Ballast or LED Driver
Motor @ 120V/277V............................................. 1/6 HP
Wiring .....................................18AWG, Length 36” (91.44cm)
Line Voltage ......................................Line, Neutral, Load
Low Voltage ...........................Dim + (violet), Dim - (gray)
Operating Temperature ........... -40°F (-40°C) to 158°F (70°C)
Tightening Nut Torque .......................................... 25-30 in-lbs
Dimensions
Collar ....................................... 1.87” diameter (47.5mm)
Collar height ........................................... 0.64” (16.3mm)
Body .. 2.5”L x 1.5”W x .83”H (63.3mm x 38mm x 21.1mm)
Weight .................................................................1.3 oz (37 g)
Enclosure ...................................................IP66 (NEMA STD)
Coverage
FSP-L2 Lens @ 8’ height ................... up to 44’ diameter
FSP-L3 Lens @ 20’ height ................. up to 40’ diameter
FSP-L7 Lens @ 40’ height ............... up to 100’ diameter
PIR Sensor
Mode
Selection
0-10V
Dimming
Level
Motion Indicator
Red LED
Light Sensor
Time
Delay
Sensor Protection Cap
NOTE: Remove Cap before use
