A Quick Look at the EasyIP CeilingMIC/AMP D
Easy-to-install interface box
n
Network/PoE+ port
– Just one connection to an EasyIP Switch or other
PoE+ connection
n
Speaker Output port
– Amplifier connection to analog speaker
n
Microphone cable opening
– sized to accommodate included grommet
for strain relief
Microphone body and drop cable
n
Drop cable and trim plates match microphone color
n
Easy access to the cable connector in the microphone body
n
Flexible strain relief boot at the top of the microphone body
accommodates standard category cable – build cable to length if needed
n
Up to 15 ft. (4.6 m) drop-down cable length
n
Pair to the host device using the Dante Controller application
Amplifier
n
Connect to an analog speaker – use existing speakers with new EasyIP
installations
n
Pair to the host device using the Dante Controller application
n
Manage speaker volume from the EasyIP host device
Amp Specifications
Power requirements
PoE+
Input
Balanced audio, one channel
Input impedance
> 100K ohms
Output
One channel
Output power
25 W if PoE+ powered, 15 W if PoE powered
Minimum output impedance
4 ohms
Complete Manual for the EasyIP CeilingMIC/AMP D Network-Connected Amplifier and Overhead Microphone
2
