Basic Connections
This is a simple installation for a medium conference room, using two EasyIP CeilingMIC/AMP D devices
for audio. In this installation, each EasyIP CeilingMIC/AMP D connects to an analog speaker and the
system’s PoE+ switch, and pairs to an EasyIP Mixer over the network. The EasyIP Mixer also manages
EasyIP cameras and originates a USB 3 stream, making audio and video available to soft conferencing
applications.
The EasyIP CeilingMIC/AMP D can also be used with other host devices that support Dante connectivity.
Note
Because the EasyIP CeilingMIC/AMP D houses two separate devices that are not directly connected to
the host device (an EasyIP Mixer in the diagram above), the microphone and amp must both be paired to
the device in order to operate.
Note
The amp can drive more than one speaker; total load must be at least 4 ohms.
Complete Manual for the EasyIP CeilingMIC/AMP D Network-Connected Amplifier and Overhead Microphone
8
