26
TV LATERAL SHIFT
HEAVY
! You may need assistance
with this step.
1. Remove the TV (See PAGE 28).
2. Open cover strips
P
.
3. Loosen but
do not remove
, locking screws
S
.
4. Slide arm
11
to the desired position.
5. Tighten locking screws
S
.
CAUTION:
Avoid potential personal injury or
property damage! Always make sure both
locking screws
S
are
tightened so the TV is securely fastened to wall plate
08
.
6. Close the cover strips
P
,then hang your TV (see STEP 3).
For wood stud applications ONLY:
CAUTION
:
Avoid potential injuries or property damage!
Do NOT adjust the arm position from center for concrete applications.
Arm
11
MUST remain centered in wall plate
08
for all concrete
applications!
EXTEND / RETRACT -- ONLY IF NECESSARY
ONLY if needed, adjust the extension/retraction arm tension with screw
E
using
hex key
13
.
E
13
TIP:
CAUTION:
Avoid potential personal injury or property damage!
DO NOT remove screws
E
, only turn enough for slight
adjustment.
