7
1
2
3/8 in.
(10 mm)
3 ¾ in. (9.5 cm)
002862.eps
07
07
CAUTION:
Avoid potential personal injury or property damage!
●
Mount wall plate
08
directly onto concrete surface (no wall covering)
●
Minimum solid concrete thickness: 8 in. (203 mm)
●
Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
●
For concrete applications, arm assembly
10
(STEP 3) must remain centered in wall plate
08
.
Keep this in mind when selecting wall plate location
●
Install three (3) lag bolts
09
in the top and one (1) lag bolt
09
in the bottom as shown in STEP 1
Solid Concrete or Concrete Block Installation
STEP 2B Attach Wall Plate
3
4
CAUTION:
Be sure the anchors
C1
are seated flush with the
concrete surface.
CAUTION:
Never drill into the mortar between blocks.
08
CAUTION:
Avoid potential personal injury or property damage!
Improper use could reduce the holding power of the lag bolt
09
.
Tighten the lag bolts
09
only until they are pulled FIRMLY against the
wall plate
08
.
DO NOT over-tighten the lag bolts
09
.
C1
Concrete achors (Fischer UX10 x 60R)
C1
available through Customer Service.
3x
1x
CAUTION:
Avoid potential personal injury or property damage!
Install
three (3)
lag bolts at the
top
and
one (1)
lag bolt at the
bottom
.
09
Concrete Anchors are not included
Contact Customer Service to inquire about
the concrete anchors.
