LEGRAND Raritan SRC-0100, User Manual

Page: 91 / 698

Chapter 5: Introduction to SRC Components
79
Alerts
The "Alerts" menu command shows a list of the following alerted
sensors, including both internal and external sensors.

Any numeric sensor that enters the warning or critical range if the
thresholds have been enabled

State sensors that enter the alarmed state
Tip: The same information is available in the web interface's Dashboard.
See
Dashboard - Alerted Sensors
(on page 110).
If there are no alerted sensors, the LCD display shows the message "No
Alerts."
To view alerted sensors:
1. Press or to select "Alerts" in the Main Menu, and press
.
2. Alerted sensors, if any, are highlighted in either red or yellow. For
color definitions, see
Yellow- or Red-Highlighted Sensors
(on page
123).

The top and bottom bars on the LCD display may be yellow or red,
depending on the type(s) of available alerts. See
Operating the
Dot-Matrix LCD Display
(on page 77).
Number Description
Alarm names.