LEGRAND Raritan SRC-0100, User Manual

Page: 239 / 698

Chapter 6: Using the Web Interface
227
Field/setting Description
Shared secret,
Confirm shared
secret
The shared secret is necessary to protect communication with the
Radius server.
4. To verify if the authentication configuration is set correctly, click Test
Connection to check whether the SRC can connect to the new server
successfully.
Tip: You can also test the connection on the Authentication page after
finishing adding servers. See
Managing External Authentication
Settings
(on page 227).
5. Click Add Server. The new Radius server is listed on the
Authentication page.
6. To add more servers, repeat the same steps.
7. In the Authentication Type field, select Radius. Otherwise, the
Radius authentication does not work.
8. Click Save. Radius authentication is now in place.
Managing External Authentication Settings
Choose Device Settings > Security > Authentication to open the
Authentication page, where you can:

Enable both the external and local authentication

Edit or delete a server

Resort the access order of servers

Test the connection to a server

Disable external authentication without removing servers
To test, edit or delete a server, or resort the server list:
1. Select a server in the list.
2. Perform the desired action.

Click Edit to edit its settings, and click Modify Server to save
changes. For information on each field, see
Adding
LDAP/LDAPS Servers
(on page 223) or
Adding Radius Servers
(on page 226).