LEGRAND Raritan PX3TS, User Manual

Page: 458 / 911

Chapter 7: Using the Web Interface
438
Configuring Data Push Settings
You can push the sensor or asset strip data to a remote server for data
synchronization. The destination and authentication for data push have to be
configured properly on the PX3TS.
The data will be sent in JSON format using HTTP POST requests. For more
information on its format, see
Data Push Format (on page 439).
For instructions on connecting asset strips, see Connecting Asset Management
Strips (on page 62).
After configuring the destination and authentication settings, do either or both
of the following:
•
To perform the data push after the occurrence of a certain event, create
the data push action and assign it to an event rule.
•
To push the data at a regular interval, schedule the data push action.
See Event Rules and Actions (on page 375).
To configure data push settings:
1. Choose Device Settings > Data Push.
2. To specify a destination, click .
3. Do the following to set up the URL field.
a. Click to select http or https .
b. Type the URL or host name in the accompanying text box.
4. If selecting https, a CA certificate is required for making the connection.
Click to install it. Then you can:
▪
Click Show to view the certificate's content.
▪
Click Remove to delete the installed certificate if it is inappropriate.
Note: If the required certificate file is a chain of certificates, and you are
not sure about the requirements of a certificate chain, see
TLS Certificate
Chain (on page 859).
5. If the destination server requires authentication, select the 'Use
authentication' checkbox, and enter the following data.
▪
User name comprising up to 64 characters
▪
Password comprising up to 128 characters
6. In the 'Entry type' field, determine the data that will be transmitted.
▪
Asset management tag list: Transmit the information of the specified
asset strip(s), including the general status of the specified strip(s) and
a list of asset tags. The asset tags list also includes the tags on blade
extension strips, if any.