LEGRAND Raritan MCD Series, Manual

Page: 63 / 83

▶
To download the firmware and upgrade utilities:
1. Visit the Raritan website (www.raritan.com).
2. Click Support on the top.
3. Choose the MasterConsole Digital (MCD) series product from the 'Choose a Product' list.
4. In this product's section, look for the desired firmware upgrade file and click it to start the
download.
5. (Optional) If the downloaded file does not include the 'release notes' document, locate the release
notes in the same section, and click it to download it.
6. Read the release notes prior to start the firmware upgrade.
Step 2: Connect the Desired Switch to the Computer Running the Upgrade Utility
You must connect the desired KVM switch to the USB port of the computer where the firmware file and
upgrade utility is available.
A Micro-USB to USB-A cable is required.
▶
To connect the switch to the computer:
1. Make sure the MCD switch you will upgrade has been powered ON.
2. Connect the computer and the switch via a Micro-USB to USB-A cable.
a.
Plug the Micro ‑ USB end of the cable into the firmware upgrade connector on the switch.
a.
b.
Plug the USB
‑
A end of the cable into the USB port on the computer.
b.
▪
MCD switch:
▪
▪
MCD
‑
LED KVM drawer:
▪
63