61
Figure 5-46. Battery test
Figure 5-47. Function configuration page
Figure 5-44. Charge setting 2
Figure 5-45. Charge setting 3
5.6.3 Battery test
Generator setting
In setting management page, click battery test icon , it will enter battery test page, as shown in Figure 5-46.
5.6.4 Function configuration
In setting management page, click function configuration icon , it will enter function configuration page. The
page includes generator setting and dedusting setting, and can be changed by the top button. Click enter box to
change the parameter. Click Save button to save the setting. The marks of setting success and setting failure is
the same as that of system setting.
Time Equal-Charge
Timing Equal-Charge Interval Time(day)
Equal-Charge Prot. Interval Time(day)
Force Equalized Charge
Force Equalized Charge
Changing Set
1
1
Next
Back
Save
Previous
Battery Set
On
On
Off
Off
On
Temper. Compensation
Charge comp. Coefficient(mV/
0
C.Cell)
Changing Set
0.2
Back
Save
Previous
Battery Set
On
Back
Standard Test
Depth Test
Cancel Test
Test Status:
Mismatch the test condition:
Battery Voltage Is Lower Than Test Allowable Voltage
Constant Curr. Timely
Generator Starting Mode
Dedusting
Back
Save
Generator
Generator Control
Off
On
Auto
Generator Charging Output
On
Generator Power Set(%)
3
Generator Batt.Low Start Volt.(V/Cell)
0.000
TEST