5
Energy Data Logger
Installation manual
4
2
1
2
3
1 -
User interface LED: see table
2 -
MicroSD memory card slot (optional)
3 -
Connection to the SCS BUS
4 -
Ethernet connection
5 -
Reset key:
– press and hold for 10 seconds to restart the Energy Data Logger;
– press and hold for 20 seconds to restart the Energy Data Logger , and set the dynamic
selection of the IP address.
1.3
Legend
User interface LEDs table
Red LED
flashing slowly and regularly:
no network found;
waiting for an address to be assigned.
Green LED
flashing slowly and regularly:
device waiting to be configured.
Green LED
flashing quickly and regularly:
time on the device not configured.
Green LED
flashing slowly and irregularly:
device working and configured.
Red-green LED
flashing quickly:
IP or microSD configuration error.
Reset, check the configuration, and the microSD
memory card model.
1
5
5
3
