13
Energy Data Logger
Installation manual
3.2
Procedure for Tablet and Smartphone
If viewing the pages using a Tablet or a Smartphone, it is recommend to set fixed IP and IP mask;
in alternative, use an application for the identification of UPnP devices.
3.3
Troubleshooting
Problem
Solution
When directly connected to the
PC, the device cannot be displayed
among the system resources.
Power the device by pressing and holding down the reset
key until the red LED starts flashing: initialisation of the
device will start, and the following parameters will be set:
IP address: 192.168.1.5
IP Mask: 255.255.255.0
It will now be possible to connect to the device and
reconfigure the parameters.
The device web pages are not
correctly displayed
1. In the browser parameters enable "Compatibility
mode";
2. Delete the browser history, including, including
"Temporary files/cache”.
Internet Explorer
7 (on Windows XP) and 9 (on windows 7)
Google Chrome
19.0.1084.56
Safari
5.1.7
Mozilla Firefox
12
Opera
11.64
Note:
the device has been tested with the following browser versions: