LEGRAND MIDDLE ATLANTIC NEXSYS User Manual Download | Manualshive

Page: 39 / 50

background image

Line Interactive UPS User Manual

Replacing the Battery

39

©2022 |

Legrand AV, Inc

. All rights reserved.

6. Use the box and pre-paid shipping label provided with your replacement battery and carefully pack and send

the discharged battery to the recycling center. Otherwise, dispose or recycle your used battery in

accordance with local laws and regulations.

CAUTION

Discharged batteries are considered hazardous waste. They must be recycled or

disposed of in accordance with all local laws and regulations or shipped to your

dealer using replacement battery packaging, where applicable.

ATTENTION

Les batteries déchargées sont considérées comme des déchets dangereux. Ils

doivent être recyclés ou éliminés conformément à toutes les lois et

réglementations locales et/ou expédiés à votre revendeur en utilisant un

emballage de batterie de remplacement, le cas échéant.

7. Slide your new battery into the front opening.

8. Use screwdriver and set screw to re-attach the battery cover.

9. Re-attach the battery wire connection as shown.

10. Use screwdriver and (4x) screws to re-attach the front panel to your UPS as shown.

Set

Screw

Battery

Cover

Battery Wire

Connection

New Battery

«
...
37
38
39
40
41
...
»

Summary of Contents for MIDDLE ATLANTIC NEXSYS



















































Reviews:

No comments

Related manuals for MIDDLE ATLANTIC NEXSYS

E3 LCD RT 1000 NEMA

Brand: INFOSEC Pages: 36

Brand: Eaton Pages: 46

Brand: G-Tec Pages: 50

Brand: Cineparts Pages: 9

Brand: Eaton Pages: 56

Brand: Ablerex Pages: 26

Brand: Xtreme Pages: 38

Brand: Leonics Pages: 7

Brand: Leonics Pages: 13

Brand: GE Consumer & Industrial Pages: 16

Brand: Sanyo Denki Pages: 46

Brand: Eaton Pages: 10

Brand: Eaton Pages: 44

POWERLINE RT 1000

Brand: Ever Pages: 48

Fighter Series FS600 / FS600B

Brand: OPTI-UPS Pages: 1

Brand: X-TREME Pages: 40

Brand: X-TREME Pages: 40

Brand: Borri Pages: 187

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands