LEGRAND KEOR LINE RT 1000 VA, Installation Manual, Page: 25 / 144

25
KEOR LINE RT 1000, 1500, 2200, 3000 VA
EN
• Do not expose the UPS to the direct sunlight or any heat sources.
• Ensure that the installation site is free from excessive dust and the ambient temperature and
humidity are within the specified limits.
• Keep the ventilation slits clean to dissipate the heat of the UPS.
To prevent overheating of the UPS keep all ventilation openings free from obstruction, and do
not place anything on top of the UPS. Keep the UPS rear panel 30 cm away from the wall or other
obstructions
• Use grounded power cable to connect the UPS to the mains supply.
Make sure that the AC utility outlet is correctly grounded.
• Do not plug laser printers into the UPS because of their high start-up current.
• Do not plug house electric equipment, such as hair dryer, air conditioner, and refrigerator into
the UPS outlets.
• Always switch off the UPS and disconnect the batteries when relocating the UPS. Be aware that,
even when disconnected, charged batteries present a possible electric shock hazard.
ON
OFF
TES
T
AIR
AIR
AIR