Owner’s Manual of DA2131-V1
- 3 -
1.3 The Rear Panel – Port & Connector
Figure 1-2
Port and Connector of DA2131-V1
Figure 2-3
Port and Connector description label
Interface
Function
RP-SMA Connector
For external antenna. You can use the SMA connector to connect a 2.4GHz
external antenna (not supplied by Legrand).
LAN
The RJ-45 jack allows LAN connection through a Category 5 cable. Supports
auto-sensing on 10/100M speed and half/ full duplex; complys with IEEE
802.3/ 802.3u respectively.
WAN
The RJ-45 jack allows WAN connection through a Category 5 cable. Supports
auto-sensing on 10/100M speed and half/ full duplex; complys with IEEE
802.3/ 802.3u respectively.
1.
For External Antenna Mode, you MUST physically attach antenna before powering on.
2.
When using an external antenna, you should configure the
Antenna Switch
from
“
Internal
” to “
External
” via Web UI.
LAN Port with PoE
WAN Port with PoE
RP-SMA Connector for External Antenna (not supplied)
