71
6 - Main menu
6.9.2.1 - Actuators
This function completes the zone configuration, indicating:
which actuators are installed for Heating;
•
which actuators are installed for Cooling;
•
which type of load the zone manages.
•
Select the
zone
(e.g. Living room)
Confirm by pressing
Confirm by pressing
Only perform with Standard confi guration (see Technical Guide)
01:
Heating
02:
Heating
03: Cooling
01:
Living room
02:
Zone2
03: Zone3
One of the following options can be selected for
each actuator in the list:
The last two items of the menu can select the
type of load managed
Not present on the system
Is used to manage the Heating system
Is used to manage the Cooling system
Is used to manage both the Heating system and the Cooling
system (e.g.: 2-pipe fan coil)
NEXT
09:
Not connected
H:
ON/OFF
C:
OPEN/CLOSE
Actuators
Not connected
FAN–COIL 3V
Zone state
Current profiles
Programming
Setup
Mode
Not connected
Heating
Cooling
Heat. & cool.
