21
5.1 - Programming from personal computer
Use the maintenance code to enter the
Maintenance
using the Maintenance menu, take the
Unit OFF the bracket.
Connect cable when requested and then follow the program procedure
For further information, see ThermoConfig software manual.
Start
ThermoConfig
program.
REMOTE
Made in Italy
OFF
ON
BUS
0492 34
Type of program
The Unit can be programmed by using the ThermoConfig software.
Programming from a PC requires a cable 0492 34, for the connection between the Unit 6-way
connector and a PC USB port.
Connection is carried out as follows:
5 - Programming
Firmware update
This function allows updating the Unit software with its latest release. Such update allows bringing
in improvements as well as new Unit functions.
The latest firmware releases are available at www.legrandelectric.com
For further information, see ThermoConfig software manual.
Before starting the fi rmware updating procedure position the slide switch on OFF
