background image

5

2 General Introduction

2.1 Overview

This device integrates traditional camera and network video technology. It adopts audio video data collection, transmission 

and storage. It can connect to the network directly without any auxiliary device. 

This device uses standard H.264 video compression technology which maximally guarantees the video quality.  

It can be used alone or used in a network area. When it is used lonely, it can be connected to the network and used from 

a network client-end. 

2.2 Features

User Management

Different user rights for each group, one user belongs to one group. 

The user right shall not exceed the group right. 

Data Transmission

Support cable network data transmission via Ethernet.

Storage Function

Support central server backup function in accordance with configuration and setup 

in alarm or schedule setting.  

Support record via Web and the recorded file are stored in the client-end PC.  

Support local SD card hot swap. 

Alarm Function

Real-time respond to local alarm input and video detection as user pre-defined 

activation setup and exert audio prompt(allow user to pre-record audio file).  

Realize real-time video detect such as motion detect, camera masking and video 

loss. 

Network Monitor 

Supports one-channel audio/video data transmit to network terminal 

Max supports 10 connections. 

Adopt the following audio and video transmission protocol: HTTP, TCP, UDP, MULTI-

CAST, RTP/RTCP and etc.  

Support web access.

Network Management

Configuration and management via Ethernet. 

Support device management via web. 

Support various network protocols.

Peripheral Equipment

Support peripheral equipment connection via the RS232 port.

Support serial port (RS232/RS485) transparent data transmission.

Power

External power adapter. Support DC 12V.

PoE

Support Power over Ethernet (PoE). Conform to the IEEE802.3af standard.  

Connect the device to the switch or the router that supports PoE function to realize 

the network power supply.  

To guarantee proper performance, make sure the power source can supply at least 

6,4W power.

Assistant Function

Day/Night mode auto switch.

Support system resource information and running status real-time display. 

Support log function.  

Support video watermark function.

Summary of Contents for 4 306 60
























































































Reviews: