32
Privacy Mask
Move the cursor to PRIVACY MASK and click confirm button, system goes to privacy mask setup interface.
PRIVACY NO:
001
ACTIVATE :
OFF
RESIZE:
DELETE
SAVE
BACK
EXIT
Note:
For security reasons, please set privacy zone a little bit larger than the privacy object size.
Each time, after modifications you need to move the cursor to SAVE button and then click confirm button to get all
setup activated. Otherwise, privacy zone may not move correspondingly with the object.
Please enter privacy mask menu, now all the privacy zones are closed.
Move the cursor to PRIVACY NO, please use left/right key to set different privacy zones.
For example, shift to 001 section and then move the cursor to ACTIVATE.
Secondly, use left/right key to select ON mode. Now there is a privacy zone in the screen centre.
Thirdly, use PTZ to move camera so that privacy object fit well with screen centre.
Fourthly, move the cursor to RESIZE and then click left and right key to adjust privacy zone direction and size.
Fifthly, move the cursor to SAVE and then click confirm button to exit.
- PRIVACY NO:
Set privacy mask zones.
Use the left/right button on the keyboard or in the speed dome terminal menu to set.
The value ranges from 1 to 24.
Please note the value here may vary due to different protocols.
- ACTIVATE:
There are two settings: on and off. When activate function is on, the privacy mask function will be
activated and displays in the screen. When activate function is off, the privacy mask function will be
closed and the blank will not displayed in the screen.
- RESIZE:
It is to adjust the privacy zone size.
Continue pressing direction button to widen or narrow zone size.
is to narrow the horizontal
width and
is to widen the horizontal width. is to widen vertical height and is to narrow the
vertical height.
- SAVE:
Here is to save user setup.
- DELETE:
Here is to delete setup and restore default setting.
- BACK:
Go back to previous menu.
- EXIT:
Log out system menu.