16
S
= 1 – 4
device address in the system
M1
=1 – 4
(indicate the number of Hi-Fi system modules, e.g. Radio, CD…, which the
Stereo Control
must manage)
Connect the BUS cable and then the RCA-RCA cable and the IR jack.
3 - Configuration
Before programming the
Stereo Control
(it must not be connected to the BUS):
3.1 - Programming
To program item 035 86 use the StereoControlConfig software supplied in the CD which comes
with the device, referring to its manual.
3.2 - Reset
Restore the factory settings as follows:
- Switch the
Stereo Control
off
- Configure: S = – ; M1 = – ; M2 = 9
- Switch the device back on and wait for LED 3 to light up
- Switch off and restore the configuration
If the multi-channel matrix (035 84) is used, only one Hi-Fi system module can be managed,
so configure M1=1.