ULTRA
™
furniture
design
owners manual 99301592
9
INSTALLATION
STEP 7
Install batteries in remote control (3-AAA, included) (
FIGURE 3
).
Note:
Make sure batteries are properly oriented.
Briefl y activate all functions of the
base with the remote control to verify all features are in working order. If
base does not operate, refer to the
Troubleshooting
section of this manual.
STEP 6
Plug electrical power cord into a working, grounded electrical outlet.
Note: An electrical surge protection device is recommended (not included).
STEP 5
Remove the plastic packaging from the base frame. Carefully rotate the
adjustable base over to position the base so it is resting on its legs.
PRESS IN ON TAB AND LIFT
OUT TO REMOVE BATTERY
COMPARTMENT DOOR.
INSERT TABS IN TAB SLOTS
AND SNAP IN TO REPLACE.
FIGURE 3
TAB
STEP 8
Return base to the level position.
BATTERY
COMPARTMENT
DOOR
POSITIVE (+)
END
POSITIVE (+)
END
