Prodigy™ 2.0 Adjustable Base Owners Manual 99301584-c
7
INSTALLATION
INSTALLATION
STEP 2
Remove the hardware box. Cut zip-tie and remove
mattress retainer.
STEP 3
Install (4) legs into the base frame. Simply screw each leg
into a tapped hole at the corner of the base frame (
FIGURE 1
).
Push pin in to adjust leg height (achieve leg height of 6 inches
to 10 inches).
STEP 4
Carefully lift the adjustable base from the shipping carton,
keeping the unit top-side-down. Uncoil and extend out
power cord from base.
AT LEAST TWO PEOPLE ARE
RECOMMENDED FOR HANDLING AND
MOVING ADJUSTABLE BASE.
DO NOT ATTEMPT TO SCREW
LEGS INTO ANY OTHER INSERTS.
THIS WILL DAMAGE PRODUCT.
CAUTION
WARNING
WARNING
CAUTION
CAUTION
POWER CORDS MUST NOT INTERFERE WITH
ANY ADJUSTABLE BASE
MECHANISMS.
WARNING
WARNING
FIGURE 1
LEGS – SCREW
INTO TAPPED
HOLE AT EACH
CORNER
PUSH PIN IN
TO ADJUST LEG
HEIGHT
(6 INCHES TO
10 INCHES)
