Prodigy™ 2.0 Adjustable Base Owners Manual 99301584-c
16
TROUBLESHOOTING
If the adjustable base fails to operate, investigate the symptoms and possible solutions
provided in the chart below:
SYMPTOM
SOLUTION
t7FSJGZQPXFSDPSEJTQMVHHFEJOUPBXPSLJOHHSPVOEFE
electrical outlet.
A grounded, electrical surge protection
device is recommended.
Test outlet by plugging in
another working appliance.
t *GUIFCBTFXBTPQFSBUFEPWFSUIFSBUFEEVUZDZDMF
thermal switch opens. Wait 30 minutes before trying
to operate the base. Once the base resumes normal
operation, do not exceed the duty cycle.
t1SPHSBNUIFSFNPUFDPOUSPM TFF
Remote Control
Programming
section of this manual for programming
procedures).
t6OQMVHQPXFSDPSEXBJUTFDPOETBOEQMVHJOUP
reset electronic components.
t&MFDUSJDBMDJSDVJUCSFBLFSNBZCFUSJQQFE$IFDL
electrical service breaker box to verify.
t%FGFDUJWFTVSHFQSPUFDUJPOEFWJDFPSFMFDUSJDBMPVUMFU
Test outlet by plugging in another working appliance.
t3FQMBDFCBUUFSJFTJOUIFSFNPUFDPOUSPM
t#BTFNFDIBOJTNNBZCFPCTUSVDUFE&MFWBUFCBTFBOE
check for obstruction. Remove obstruction.
t )FBETFDUJPONBZCFUPPDMPTFUPUIFXBMM
t*GCBTFJTMPDBUFEPOIBSETVSGBDFnPPSJOHQMBDFDBSQFU
pieces or rubber caster cups under each leg or caster
of the base. (See accessory sheet for rubber caster cup
order information.)
t&MFWBUFUIFIFBEPSGPPUTFDUJPOBTIPSUEJTUBODF XJUI
the remote control) to realign the lift/lower mechanisms
with the bed support platform.
t7FSJGZUIBUUIFCBTFJTOPUQPTJUJPOFEBHBJOTUBXBMM
nightstand, or other object that may cause vibration or
noise.
t*GCBTFJTJOTUBMMFEPWFSBCFEGSBNFWFSJGZNBTTBHF
motors are not causing bed frame (or bed frame
components) to vibrate.
Remote control illuminates and appears to be
operable, but will not activate base.
No features of the base will activate.
Remote control will not illuminate.
Head or foot section will elevate, but will not
return to the horizontal (flat) position.
Excessive massage motor noise.
