Premier Series
™
Owners Manual 99301588-b
24
REMOTE CONTROL PROGRAMMING
(1 or 2 remote controls - 2 bases)
BASE 1
BASE 2
FIGURE 23
DUAL SYNC
CABLE
OR
REMOTE 1
REMOTE 2
Program One Remote to Operate Two Bases (Tandem
Syncing)
- perform the following numbered procedure.
STEP 1
Choose base 1 remote. Retain base 2 remote control
as a spare or use if 2 remotes are desired to operate
both bases.
STEP 2
Locate dual sync cable (
FIGURE 23
).
STEP 3
Position both bases on their sides, in close proximity
to each other.
CAUTION: AT LEAST TWO PEOPLE
ARE RECOMMENDED FOR HANDLING AND
MOVING ADJUSTABLE BASE.
STEP 4
Locate the control boxes on both bases. On base
1, make sure the primary/secondary button is in
the “OUT” position. On base 2, press the primary/
secondary button so it is in the “IN” position
(
FIGURE 24
).
STEP 5
Plug one end of the dual sync cable in the CAN/BUS
17 port of the control box of base 1. Plug the other
end of the dual sync cable into the CAN/BUS 17
port of the control box of base 2 (
FIGURE 25
).
FIGURE 24
PRIMARY/
SECONDARY
BUTTON
CONTROL
BOX
DUAL SYNC
CABLE
CAN/BUS
17 PORT
continued on next page...
FIGURE 25
Summary of Contents for PREMIER FOUNDATION DESIGN
Page 2: ......
