Premier Series
™
Owners Manual 99301588-b
20
c. Attach one headboard bracket fl ange to one of the bracket channels
with (2) hex head bolts/nuts (
FIGURE 19
). Tighten bolts. Repeat
procedure to attach the other headboard bracket fl ange.
d. Slide headboard bracket assemblies (in or out) to achieve a distance of
1.5 inches (38.1mm) to 2 inches (50.8mm) between the edge of the
base and headboard bracket fl ange assemblies (
FIGURE 19
).
TWIN SIZE HEADBOARD BRACKET
ASSEMBLIES ARE SHOWN
(FIGURE
19).
QUEEN SIZE HEADBOARD
BRACKETS ARE EQUIPPED WITH
ANGLE BRACES.
NOTE
INSTALLATION
HEADBOARD
BRACKET
FLANGE
USE (2) 1 INCH LONG HEX HEAD
BOLTS AND NUTS (TIGHTEN) TO
ATTACH BRACKET FLANGE TO
BRACKET CHANNEL
SLIDE BRACKET
ASSEMBLIES IN OR
OUT TO ACHIEVE
POSITION
FIGURE 19
e. Firmly tighten the 3 inch carriage bolts of both headboard bracket
channels.
f. Measure the distance (center-to-center) between the mounting holes
in the headboard.
g. Measure the center-to-center distance between the mounting slots of
the headboard bracket fl anges.
h. If bracket fl ange adjustment is required to accept the headboard,
remove the 1 inch headboard bracket fl ange bolts and move fl anges
side-to-side for the adjustment (
FIGURE 19
). Reinstall bolts and
tighten.
i. Install headboard.
Typical Premier™
adjustable base installation is now complete.
STEP 11
Install mattress on adjustable base.
Summary of Contents for PREMIER FOUNDATION DESIGN
Page 2: ......
