Leggett & Platt Falcon 2.0+, Owner'S Manual

Page: 9 / 24

9
Falcon™ 2.0+ Owners Manual 290-0009-b
INSTALLATION
STEP 6
Plug electrical power cord into a working, grounded electrical outlet.
Note: An electrical surge protection device is recommended (not included).
STEP 7
Briefly activate all functions of the base with the remote control to verify
all features are in working order. If base does not operate, refer to the
Troubleshooting section of this manual.
STEP 8
Return base to the level position.
MATTRESS RETAINER INSTALLATION (OPTIONAL)
Mattress is equipped with a Micro-Hook™ system
to captivate the mattress (
FIGURE 2 ), but if
desired a mattress retainer can also be used. If
installing a mattress retainer, proceed to Step 9.
If not installing a mattress retainer, proceed to
Step 10.
IMPORTANT!
THIS PRODUCT SHOULD NOT BE USED WITH
EITHER A DUST RUFFLE OR A MATTRESS
ENCASEMENT. IF EITHER A DUST RUFFLE
OR MATTRESS ENCASEMENT IS NEEDED,
THEN A MATTRESS RETAINER BAR IS
REQUIRED.
FIGURE 2
Micro-Hook ™
SYSTEM
FOOT END OF BASE
Micro-Hook ™
DETAIL