Leggett & Platt Falcon 2.0+, Owner'S Manual

Page: 10 / 24

Falcon™ 2.0+ Owners Manual 290-0009-b
10
INSTALLATION
STEP 9
Install mattress retainers at the foot end of the adjustable base as follows:
a. Locate grommeted holes at foot of base ( FIGURE 3 ).
b. Place mattress retainer ends into grommeted holes in top surface of
adjustable base ( FIGURE 3 ). Press down until horizontal retainer section
is flush against base.
MATTRESS
RETAINER
FIGURE 3
Typical adjustable base installation is now complete.
STEP 10
Install mattress on adjustable base.