PEBBLE LAYOUT INSTRUCTIONS
CONTINUED
19
4. Pick out the smallest two pebbles and lay to one
side, lay the first row of four loose pebbles on top of
the front coal. Ensure the back of the pebbles are
resting on the fuel bed and there are even gaps all
round (Fig. 26).
5. Choose three loose pebbles and place them in line
on the next row up, again making sure all the gaps are
even. It is important that the pebbles ‘bridge’ the peaks
of the fuel bed and are not placed in between. This
helps the flow of burnt gases and should give an even
glowing fuel bed (Fig. 27).
6. Place the next two pebbles in the middle, on the
back edge of the pebbles previously laid ensuring even
gaps all round. Finally place the two small pebbles, one
in each top corner. Make any adjustments necessary to
achieve even gaps as this will help in giving a well
balanced flame picture and an even glow (Fig. 28).
Fig. 26
Fig. 27
Fig. 28
Small Pebble
Small Pebble
