Legend QDI I740 AGP, Manual

Page: 11 / 30

User’s Manual 5
Note!
Before installing the I7400/IV7400 AGP card,
touch the metal surface of your computer to discharge
yourself of static charge, hold the graphic card by the
edges, be sure not to touch the IC chips, leads or circuits.
1. Before opening the computer cover , be sure that the
power to the computer system unit and all devices
connected to it are turned off. Disconnect the
computer from the power supply.
2. In a typical PC computer all cover mounting screws
are located on the back of the computer. Remove
these screws and save them. Carefully remove the
cover.
3. Remove an existing VGA card or disable the
motherboard’s VGA.
4. Remove the AGP slot shield at the back of the
computer by removing its retaining screw and lifting
it out. Save the screw.
5. Carefully insert the graphics card into the AGP slot
by holding the card at the top and gently pushing both
ends into the slot at the same time. Do not force the
card into the slot! If the card does not fit easily, pull
it back, and try again.