3
5. All.
Hook the barrier screen to the rear side of the
Clearview frame.
6. 738
only
. Clip the extension baffl e provided with
the Clearview frame to the sheet metal edge of
draft hood divider as indicated.
7. All.
Hook the Clearview frame fi tted with the barrier
screen within the outer trim.
8. Hook the fret to the Clearview frame.
Installation with 1236MAP—Metropolis Fret
1. Install 738 or 739 engine as per instructions
supplied with engine. Install RF24XB engine and
RA24ZC zero clearance box as per instructions
supplied with each.
2. Install trim to engine as per instructions supplied
with engine or trim.
3. Remove the bottom support from the Clearview
frame and discard. Refi t the nuts to the frame.
4. Hook the Clearview frame within the outer trim.
5. Center the fret in the Clearview frame at the base
of the fi replace.
Remove bottom
support to
accommodate
Metropolis fret
Metropolis
Fret (sold
separately)
Rear view
For 738 heaters only:
clip
extension baffl e to sheet metal
edge of draft divider
Outer trim
Clearview frame
Install extension
baffl e with clips
facing down
Rear view
