Legend Flame EF290A, Owner'S Manual

Page: 14 / 20

12

Unplug the power cord from the outlet.

Turn the Power Switch on the CONTROL PANEL to OFF. Wait at least
5 minutes.

Inspect the fireplace to make sure no vents are blocked, or clogged
with dust or lint. If they are, use a vacuum to clean the vent areas.

With the Power Switch in the OFF position, plug the power cord back
into the outlet.
If it switches off again, UNPLUG THE HEATER RIGHT AWAY! Have the
outlets, wiring, and breaker box inspected by a professional. Make
necessary repairs before using the heater.
6. CARE AND MAINTENANCE
Cleaning
NEVER immerse in water or spray with water. Doing so could result in
electric shock, fire, or personal injury.
Metal:

Buff using a soft cloth, slightly dampened with a citrus oil-based product.

DO NOT use brass polish or household cleaners as these products will damage the
metal trim.
 NEVER use abrasive cleansers, liquid sprays, or any cleaner that could scratch the
surface.
Vents:

Use a vacuum or duster to remove dust and dirt from the heater and vent areas.
Logs and base:
 The log set should not be operated with an accumulation of dust or dirt on or in
the unit, as this can cause a build up of heat and eventual damage.

Dust and vacuum the log set as needed. Use a damp cloth and a mild detergent to
clean painted surfaces of the fireplace. Never use abrasive cleaners.
ALWAYS turn the heater OFF and unplug the power cord from the
outlet before cleaning, performing maintenance, or moving this
fireplace. Fail to do so could result in electric shock, fire, or personal
injury.