www.connectinglegacy.com
- 8 -
Parameter Settings
Screen can not set parameters
System Settings Page
Baud Rate
：
9600 do not set
Key description
1) SW1----NEMU
，
SW2----ENTER
，
SW3----UP
，
SW4----DOWN
，
SW5----ESC.
2) Each item is
“
》
”
or
“
--
”
as a beginning
，
among them
“
》
”
shows the current cursor position
，
press UP or DOWN key can move the cursor position
；
with
“
》
”
end of the project
，
the
content of the said project has not shown, press ENTER key can enter the corresponding
page.
3) Press ESC key can be returned at the next higher level directory
；
In any position
，
press
NEMU key can return to the main menu page.
4) In a dormant state, press any key, can activate the screen.
Dormancy/shutdown
Under normal operation condition, with no keystrokes 1 minutes later, system will enter a
state of dormancy/shutdown.
Shutdown/dormancy state
，
press any key
，
screen can be activated.
4.Safe handling guide
4.1.System Diagram