Legacy V System, Owner'S Operating Manual

Page: 4 / 35

4
Uncrating
Each V speaker has been carefully packaged in a specially designed crate to ensure they reach you safely and undamaged.
You will find the Top, Front and Back panels labeled on each crate as well as the Left/Right speaker designation.
Screws that are to be removed will be painted black for your reference.
Unpacking Instructions:
Step 1: First remove the top panel B . Due to the height of the crate, this will likely require a step ladder.
Step 2: Once the top panel is removed, remove internal cross bracing
C
. There are screws located on each end of the brace.
Step 3: Next, remove the front panel
A
and braces
D, H
.
Step 4: Then, remove the two side panels F, G .
Step 5: Finally, remove the remaining back panel
E ,
leaving the speaker resting on the base
I
. Due to the substantial weight of the loudspeakers,
we suggest that at least two persons assist in removing each speaker from the base.
Step 6: Remove any additional foam/bagging. Use caution when moving to the final listening position. If a dolly is used, cover with a soft material such as a
blanket to prevent any scratches.
Note: You will find the associated top rear speaker grille bonnets, Wavelet processor unit and cables each boxed separately.