manualshive.com logo in svg

Legacy V System, Owner'S Operating Manual

Share
Download
Legacy V System Owner'S Operating Manual Download Page 12

12 

 

Speaker Connections  

The standard V system provides two channels of amplification internally for the subwoofer and bass drivers. 
You will need to supply two additional channels for the lower midrange (60 watts minimum) and 
midrange/treble (30 watts minimum) of each speaker.  Additional channels of internal amplification can be 
provided by special order.   Two professional grade 15 ft. balanced XLR cables are provided for each speaker. 

 

 

 

  

Wavelet processor output connections: 

1 Left speaker subwoofer amplifier (internal 1000 watts)

 

 

2 Left speaker bass (internal 500 watts) 

3 Left lower midrange amplifier (user provided) 

4 Left midrange/treble amplifier (user provided) 

 

5 Right speaker subwoofer amplifier (internal 1000 watts) 

6 Right speaker bass (internal 500 watts) 

7 Right lower midrange amplifier (user provided) 

8 Right midrange/treble amplifier (user provided) 

Summary of Contents for V System




































Reviews:

No comments

Brands by name

Popular brands

Load more brands