Legacy Super Magnum Coal Stoker, Installation & Owner'S Manual, Page: 13 / 47

2.5 PRE-USE CHECK LIST
Place the appliance in a location near the final installation and
follow the procedures below:
1. Open the appliance and remove all articles packed inside.
Inspect all items for shipping damage. Notify dealer of
any missing or damaged goods.
2. All safety warnings have been read and followed
precisely.
3. This Owner's Manual has been read in its entirety.
4. Floor protection requirements have been read and
followed.
5. The flue connector has been installed in accordance with
the instructions herein.
6. The proper clearances from the appliance and chimney
connector to combustibles have been met.
7. The masonry chimney has been cleaned and inspected by
a professional.
8. The chimney meets the minimum height requirements.
9. All labels and hang tags have been removed from the
glass.
10. All plated surfaces have been wiped clean as applicable.
11. The room sensor and any additional cable has been
installed properly.
12. A properly grounded electrical receptacle is available
within reach of the unit's power cord.
-13-
WARNING!
Inspect appliance and
components for damage.
Damaged parts may impair safe
operation.
•
Do NOT install damaged components.
•
Do NOT install incomplete
components.
•
Do NOT install substitute components.
•
Report damaged parts to dealer.
WARNING!
Fire Risk: Alternate Heating
Systems disclaims any
responsibility for, and the
warranty will be voided by, the following
actions:
•
Installation and use of any damaged
appliance.
•
Modification of the appliance.
•
Installation other than as instructed by
Alternate Heating Systems.
•
Operating appliance without fully
assembling all components.
•
Operating appliance without legs
attached.
•
Overfiring.
•
Any action that may cause a fire
hazard.