Legacy Sconce, Owner'S Manual

Page: 9 / 17

9
Mounting Sconce:
1. Install the provided metal wall plate as shown (Figure 1) with a minimum of (4), #8 Pan
Head Screws, making sure that the proper side of the wall plate is placed against the wall.
Note that the Sconce speaker has two pre-attached diamond shaped keys mounted to the
back panel. These keys will align with the corresponding diamond shaped keyholes in the
wall plate.
Consider the position and orientation of the speaker when attached with corresponding key
points. Use screws long enough to provide at least one-inch penetration into the wall stud
or masonry surface. If using the minimum number of mounting screws, insure that at least
one screw is installed on each side of the back plate keyhole area.
It is recommended that on-wall speakers be installed where all fasteners or screws are
imbedded into a wall stud or masonry component. Other options
may include the use of
mollies or toggles depending upon the wall materials and thickness.
Caution : Improper mounting of the speaker to the wall could result in the speaker falling,
creating a dangerous condition. You should engage the services of a professional installer
if you are not fully qualified to mount these speakers on a wall.