Legacy Sconce, Owner'S Manual

Page: 8 / 17

8
Installation Preparation:
1. Determine and mark the location of all speakers. Use of a level will be helpful to assure
the proper orientation. Sconce speakers may be installed either horizontally or vertically.
Sconce Surround speakers can only be installed in the vertical position. Consider the
location of pipes, wires or other materials that may be affected by drilling or installing
fasteners into the wall.
2. Install suitable speaker wire from your electronic components to the location of where the
speaker terminal plate will rest, once installed, and leave enough wire length to allow easy
connection to both the receiver/amplifier and the speaker. Legacy Audio recommends the
use of up to 16-gauge wire for the Sconce speaker system. If installing in the wall be sure
that the wire meets local electrical code.