17
Under the above mode, press Up/Down buttons to select desired DCS Tone and then
press Mode button or
PTT button to set RX or TX tone option. The radio will then save selection and
exit to receiving stand-by mode.
** Invert DCS Tone Select
Under the above mode, press Up/Down buttons to select desired DCS Tone and then
press Mode button or
PTT button to set RX or TX tone option. The radio will then save selection and
exit to receiving stand-by mode.
** Tx Output Power High/Low Setting
Under the above mode, press Up/Down buttons to select desired Output Power and then
press Mode button or
PTT button to set the output power to 1W or 5W for the current channel. The radio
will then save selection and exit
to receiving stand-by mode.
Mode
BEEP
H
Mode
BEEP
H
Mode
BEEP
H
BEEP
H
BEEP
H
BEEP
H
Up/Down buttons
Up/Down buttons
