background image

READ AND FOLLOW ALL INSTRUCTIONS BEFORE USE.

SAVE THESE INSTRUCTIONS FOR FUTURE USE. 

AUTOMATIC BLEEDER VALVE: (see figure 1):
 

• Bleeds air when reconnecting the barrel and head.

 

• Reduces air locks & priming problems.

STORAGE HOOK: (see figure 2):

 

This hook enables the gun to hang when not being used for convenient storage.

SHOULDER STRAP (see figure 3):
       

Attach strap by latching each end into the two holes located on either side of the hang hook.

COUPLER HOLSTER (see figure 4):
 

Insert the grease coupler end of the grease hose into the loop hole located below the gun head assembly when gun  

 

is not in use.

PRESSURE RELIEF VALVE (see figure 5):
       CAUTION:  Never allow any part of the human body to come in front of, or in direct contact with a grease discharge  

 

 

outlet.  Direct the air pocket valve away from yourself and other persons in the vicinity.  Never point the nozzle of the  

 

 

gun at yourself or toward anyone else. 

 

Pressure relief is factory preset at 6000 psi +/- 500 psi.  If back pressure in the grease line exceeds the preset limit, 

 

grease will then be expelled from this valve to reduce risk of motor overload and limit excessive grease pressure in grease hose.     

 

Do not exceed specifications or alter gun to perform beyond ratings.  Such misuse will void warranty and can cause possible injury. 

 

WARNING:  Do not adjust relief pressure above 6,000 psi.

BATTERY CHECK (see figure 5):
 

To check the remaining battery life, press the black button on the back of the handle.

 

Green/Yellow/Red:

 Battery is at full power.

 

Yellow/Red:

 Battery life is at partial power. Charge soon

 

Red:

 Battery needs to be recharged.

SAFETY TRIGGER (see figure 7):
 

To prevent accidental expulsion of grease, your gun has been built with a safety trigger. 

 

This trigger can be found below the main trigger. The safety trigger and the main trigger 

 

must be depressed simultaneously in order to expel grease.

Figure 1

Automatic Air Bleeder

Figure 2

Storage Hook

Figure 3

Shoulder Strap

Figure 7

Safety Trigger

Relief Valve

Figure 5

Figure 6

Battery Check

Figure 4

Coupler Holster

Summary of Contents for Lock-n-Load L1380L








Reviews: