sListem wiring
MONO BLOCK AMPLIFIER LA-I.qOO
•
LA-2001D
head
unit
LJR
Audio
Outputs
srum aUTrUI ClnIlCTlln
���
(@
==
o
TO
S
A
TELLI
T
E
AMPLIFIER
LINE INPUT
IS 0
-
�+
subwoofer
���
(@
11111111
SPIIIII
IIPmlCI
2-' IIIIS!
mounting and Installation
Your new American LEGgarnElifier comes complete with all required mounting hardware. When determining a suitable location in your vehicle for the amp, please remember that
it is a high-power electronic device capable of generating high heat.
For this reason,
alap chaase a lacalian in JIIur vehicle which hIS law libralian,adequale IInliiatian,a minimum
aI
dust,and na maisture.
Be sure to mount
the amp in such a manner as to allow reasonable airtlow over the cooling fins.
Mark the lacatian far the maunling
screw
hales
by positioning the amp where you wish to install it and use a scribe (or one of the mounting screws) inserted in each of the
mounting holes to mark the mounting surtace. If the mounting surtace
IS
carpeted, measure the hole centers and mark with a felt tip pen.
lefare lIIe.ing ta drill the maunling hales,
take
nate allIIJ wires, lines ar
allier
devices in JIIur vehicle which may be lacated behind tile maunting
.. rllce!
Then drill pilot holes in the mounting surtace for the mounting screws and insert them. Tighten the screws securely.
ta
JIIur amplifier, plelSe abserve the
Use at least
8
gauge wire for power and ground connections.
Wire the amplifier directly to the car battery.
For the ground connection, use the shortest possible wire to a good chassis ground point.
American LEGACY Series amplifiers feature built-in fuse systems. These fuses protect both the
amplifier and the electrical system in your vehicle from tault conditions. If you ever need to
replace the fuse in your American LEGACY Series amp, use a fuse of exactly the same type and
rating. A different type or rating of fuse may result in damage or fire.
