Maintenance
Lighting :
1. Make sure there is only a small amount of ash in the bottom of the bowl
2. Place a layer of dry kinding or natural fire starter onto the center of grid
3. Place above that a layer of dry seasoned hardwood that is no more than 3/4 the diameter of the bowl .
4. Use a match to light kinding or fire -starter
Tending the Fire
You may need to shift and /or add logs for an ideal experience .
DO NOT place a hot screen or hot fire pit tools onto combustible surfances such as grass wooden deck or furniture .
1. Using ths Flame Shiled that is provied and heat resistant gloves , carefully remove screen ,
2. Wait until glowing coals have developed before adding any addtional wood ,. If addtional wood is required ,
place wood on top coals be careful not to shift ashes
Extinguishing :
1. Allow fire to burn itself out
2. DO NOT use water to extinguish as this is dangerous and can cause damage to this outdoor fire pit
Inspecting :
This fire pit should be inspected on a regular basis to ensure product safety and longer product life
DO NOT attempt to inspect this fire pit until the fire is COMPLETELY out and cool to the touch
1.Check components for any signs of damage or rust.
2.If damage to any component is detected, do NOT operate until repairs are executed.
Cleaning
This fire pit should be cleaned on a regular basis to promote safer experiences and longer product life.
Note: After repeated use, a slight discoloration of the finish may occur.
DO NOT attempt to clean this fire pit until the fire is COMPLETELY out and cool to the touch.
DO NOT use oven cleaner or abrasive cleaners as they will damage this product.
DO NOT clean any part of this fire pit in a self cleaning oven as it may damage the finish .
1.Wipe exterior surface with a mild dishwashing detergent or baking soda.
2.For stubborn surface use a citrus based degreaser and a nylon scrubbing brush.
3.Rinse and clean with water.
4.Remove built –up creosote from components with a chimney cleaning product.
Storage
DO NOT move or store this fire pit until the fire is COMPLETELY out and cool to the touch.
1.Once the fire is out , coals are cold and fire pit is cool to the touch , remove ashes and properly dispose.
2.Store the fire pit in a dry location to maximize product life.
3.Store assembled in a location away from children and pets.
4. Please use cover to cover the whole fire pit when not in use
5
Summary of Contents for COD-WD-SM/WELFPB-2
Page 2: ......
